Trusted Concrete Resurfacing Contractor In Minnesota
A New Concrete Surface Without Tearing Out The Slab
Replacing a commercial slab means demolition, weeks of downtime, and a new pour that has to cure before any finish goes on. Resurfacing skips all of it. Days, not weeks. A well-bonded overlay restores a flat, durable surface over your existing concrete. Once it cures, we can polish, coat, stain, or stamp it. Your choice.
The Concrete Guy is a concrete resurfacing contractor for Minnesota businesses. We work in warehouses, stores, restaurants, offices, and apartment buildings. The same crews that handle our epoxy and polished concrete work install the overlays. We evaluate the slab, repair what needs repair, and install the overlay that fits the finish you want on top.
When Resurfacing Beats Replacement
Resurfacing is the right call when the slab is sound but the surface is damaged. Spalling, pitting, salt scaling, shallow cracks, and old adhesive scars are all problems an overlay solves. So are the uneven patches left by past repairs. Floors that sit out of level get a self-leveling underlayment before the finish goes on.
Resurfacing is the wrong call when a slab is heaving, settling, or cracked through its full depth. Those are structural problems, and they need concrete repair first. An overlay on top of a moving slab will crack the same way the slab does, and no product on the market can stop that. We inspect every floor and tell you which situation you have before we quote.
Most worn commercial floors in Minnesota fall on the resurfacing side of that line. The savings in cost and downtime over a tear-out can change the whole project budget.
Resurfacing And Finishing From One Crew
An overlay is rarely the final floor. Our crews polish, coat, stain, and seal the floors they resurface, so we pick the overlay with the finish in mind from day one.
Warehouses, retail chains, and restaurants cannot close for long. We phase resurfacing into sections, work nights and weekends, and use fast-setting products when the schedule demands it.
If your slab needs structural repair instead of an overlay, we say so. If an overlay solves the problem at a fraction of replacement cost, we show you how and why.
Why Owners Resurface Instead Of Replace
Resurfacing takes days of downtime, not weeks
No demolition or haul-away of old concrete
No waiting on a new pour to cure
A level overlay for racking and fixtures
A sound base for polish, epoxy, or stain
Salt scaling and pitting resurfaced for good
Old adhesive scars and patches hidden
Freeze and thaw rated exterior systems
Decorative textures, stamps, and stencils
Lower total project cost in most cases
Building stays open during phased work
Resurfaced floors last decades with simple upkeep

Concrete Resurfacing For Busy Minnesota Commercial Spaces
The Concrete Guy has worked Minnesota concrete for four generations. We know how salt, frost, and decades of traffic damage a slab. We also know the difference between surface wear that resurfacing fixes and structural movement that it will not.
Large floors are routine for our crews. We grind and prime the slab, place the overlay in sections, and return to finish it with polish, resin, or stain. Your building stays usable while the work moves through it.
What Owners And Managers Say After We Resurface





Commercial Floors We Resurface Most Often

Warehouses Headed For Polish
Out of level or patched warehouse slabs get a polishable topping or self-leveler. The finished floor then polishes to a consistent shine. Racking also sits flatter and safer on a level floor.

Retail Build-Outs
Old adhesive scars and trench patches from past tenants disappear under a new overlay. The space opens with a flat, finished floor. Fixtures and shelving install faster on a true surface.

Restaurant And Taproom Floors
Pitted dining room slabs get a decorative overlay with stain or dye. The floor looks custom and cleans like concrete. Most dining rooms reopen within a few days.

Office And Loft Conversions
Carpet comes up and the slab underneath is rarely pretty. An overlay gives the space a clean concrete floor without demolition. It suits open offices, studios, and creative spaces.

Balconies And Walkways
Apartment balconies, entries, and walkways get waterproof membranes. These systems handle water, salt, and frost movement. Residents keep using the building while we work in sections, and each area reopens quickly.

Pool Decks And Patios
Spalled pool decks and patios get slip-resistant decorative overlays. The sealers on top are rated for Minnesota winters. The new surface stays cooler and safer underfoot, and it hides years of salt and frost damage.
Overlay And Resurfacing Systems We Install
The right overlay depends on how damaged the slab is, how far out of level it sits, and what finish goes on top. We choose after testing moisture and surface hardness. Learn more in our concrete resurfacing guide.

Our Concrete Resurfacing Process
We begin with a site walk and slab testing. Moisture, surface hardness, and the depth of the damage decide which overlay fits and how thick it needs to be. We also check drainage and edges on exterior slabs.
Prep comes next. We remove old flooring and coatings, then grind or shot blast the concrete to open the surface. Cracks and spalls get compatible fillers, and primers go on at the rate the overlay maker specifies so the new layer truly bonds.
Then we place, level, and finish the overlay to the texture or flatness the project needs. That might be a smooth floor for racking or a stamped stone look for a hotel lobby. Most overlays accept foot traffic within 24 hours and take a finish system within two to seven days. The same crew returns to polish, coat, or stain it.
Recent Resurfacing And Decorative Projects
Concrete Resurfacing FAQs
How long does a resurfaced concrete floor last?
A bonded cementitious overlay over a well-prepared slab performs for decades. The finish on top sets the upkeep. Polished overlays need burnishing now and then. Coated overlays need a fresh topcoat every several years. Exterior overlays need resealing.
Can you resurface a floor that has old tile or carpet on it?
Yes. We remove the flooring, grind off the adhesive and thinset, and repair the slab before the overlay goes down. Removal, prep, and resurfacing all appear on one quote, so you only coordinate with one contractor.
Is resurfacing cheaper than replacing the concrete?
In most cases, yes, by a wide margin. Resurfacing avoids demolition, haul-away, new concrete, and the cure time a fresh pour needs. It also keeps the building open, which matters as much as material cost to most commercial owners.
Do you resurface exterior concrete in Minnesota?
Yes. We resurface patios, pool decks, walkways, and entry slabs with overlays rated for freeze and thaw, then seal them for winter. We check drainage and existing damage before we recommend a system, since water that pools on a slab will find its way under any overlay in time.
Can a resurfaced floor be polished?
Yes, when we install a polishable overlay. Standard self-leveling underlayments are meant to be covered by another floor. Polishable toppings are made to be ground and polished like fresh concrete, so we choose the product based on the finish you want.
A Minnesota Concrete Family Since 1920
I am Matt Hage, owner of The Concrete Guy. My family has worked Minnesota concrete since 1920. We have seen what decades of salt, frost, and traffic do to slabs, and we know when an overlay will last. We resurface floors across the metro. That includes Saint Paul, Wayzata, Chanhassen, Eagan, and Bloomington. We also travel for projects nationwide.
Finish your overlay with concrete staining or epoxy flooring, or request a resurfacing quote today.









