Dependable Commercial Kitchen Flooring In Minnesota
Restaurant Floors That Stay Safe, Clean Fast, And Pass Inspection
A kitchen floor fails in ways that cost money every day it stays in service. Grout lines trap grease. Tiles crack. Loose tiles trip people. Drains clog. Thin epoxy blisters under hot water and peels at the drains. Commercial kitchen flooring in Minnesota has a harder job than almost any floor in the building, and it still has to pass inspection.
The Concrete Guy installs one-piece resin kitchen floors. Restaurants, hotels, hospitals, schools, breweries, and commissaries all call us. We use urethane cement and quartz epoxy systems with integral cove base, slip-resistant texture, and slopes to drain. Most installs happen overnight or across a short closure, so the kitchen keeps serving.
What A Commercial Kitchen Floor Has To Handle
Back-of-house floors see hot water, steam, fryer oil, sugars, and dairy. They take acid from citrus and tomato, then the caustic cleaners used to remove all of it. Staff move fast on a wet surface for a full shift while pans drop and racks roll. Health inspectors want a smooth, non-absorbent floor that cleans easily and curves up the wall at every edge.
Tile meets some of those needs and fails on others. Grout absorbs grease and cracks under thermal shock. Once tiles loosen, the floor becomes a liability. Quarry tile also forces a kitchen to close for days when it needs repair, and that lost service can cost more than the repair itself.
A monolithic resinous floor removes the grout lines. It bonds to the slab as one surface. In most cases we can repair or recoat it in a single night. That keeps the kitchen open when something does go wrong.
Kitchen Floors Built Around Service Hours
The crew that installs your restaurant floor installed a brewery or food plant floor the week before. Same materials, same prep standards, and the same attention to drains and cove base.
Cove base, drain slopes, sealed penetrations, and smooth transitions are part of every kitchen spec. They are never add-ons, and they are what inspectors look for first.
Restaurants, hotels, and hospitals cannot stop serving. We work overnight, through planned closures, and station by station, with low-odor products that keep the dining room open.
Why Kitchens Switch To Resinous Floors
No grout lines to trap grease
Integral cove base at every wall
Slopes that move water to the drains
Textured grip on wet, greasy floors
Survives hot water and steam cleaning
Resists fryer oil, sugars, and dairy
Handles acids from citrus and tomato
Stands up to caustic sanitizers
Seals tight around equipment legs
Overnight installs for most kitchens
Easy spot repairs without closing
Clean, bright look for open kitchens

Commercial Kitchen Flooring Installed Without Losing Service
The Concrete Guy plans kitchen floors around your reservations and deliveries. We remove old tile or failed coatings with dust control, grind the slab, and test it for moisture. If the kitchen cannot close, the new floor goes down in phases.
Ranges, fryers, and prep tables have to move or get protected, and we work that out with your team before the first night. Fast-cure topcoats allow foot traffic within hours and full service the next day for most systems.
What Restaurant And Facility Managers Say About Us





Kitchens And Food Spaces We Floor

Restaurant Cook Lines
Fryers, flat tops, and dish pits get urethane cement with cove base and slopes to drain. The line stays safe through the dinner rush. Grease washes straight to the drains.

Hotel And Banquet Kitchens
Large kitchens feed events and room service around the clock. We phase the floor by station so cooking never stops. Banquet prep and room service keep running while each station gets its new floor.

Hospital And Senior Living Kitchens
Healthcare kitchens need strict sanitation and steady traction. Our joint-free systems clean fast and resist harsh disinfectants. We schedule around meal service and infection control rules set by your facility team.

School And University Kitchens
Summer and holiday breaks give us a clean window. We remove old tile, coat the kitchen, and hand it back before students return. Cafeteria lines get the toughest system.

Breweries And Taprooms
Brew floors stay wet with caustic cleaners and spent grain. We pair urethane cement in the brewhouse with stained concrete in the taproom. Each room gets the floor that fits its use.

Commissaries And Ghost Kitchens
Shared kitchens run long hours with many cooks. A quartz floor with cove base keeps the space easy to clean between shifts. Color zones can mark each tenant area.
Commercial Kitchen Flooring Systems We Install
Most kitchens use more than one system. We put the toughest floor where heat and water hit hardest and a lighter system in dry areas. Every option goes down over a slab we have tested for moisture and ground to the right profile.

How We Install A Kitchen Floor
We start by walking the kitchen during service. That shows us traffic paths, wet zones, drain locations, and the equipment that has to move. Then we test the slab and write a schedule around your closures.
On install night, old tile or coatings come off with dust control. We grind the slab, repair cracks, and build slopes to the drains. Cove base goes in at the walls, then the body coat and textured topcoat.
By morning, most systems accept foot traffic. Equipment goes back the next day, and your team gets care steps for daily cleaning. Hotel and institutional kitchens follow the same steps one station at a time.
Recent Kitchen, Food Plant, And Commercial Projects
Commercial Kitchen Flooring FAQs
What is the best flooring for a restaurant kitchen?
Urethane cement is the best choice for cooking lines and dish areas. It survives hot water, steam, grease, and caustic cleaners without blistering or peeling. Quartz epoxy is a good fit for prep, storage, and service areas. Both are joint-free, coved at the walls, and easy to sanitize. Most kitchens use both.
Can you install a new kitchen floor over existing tile?
In most cases we remove the tile so the new floor bonds to the slab. Going over tile leaves grout lines and loose tiles beneath the finish, and that leads to failure. We remove tile and thinset with dust control as part of the project, so you deal with one crew and one schedule from the first night to the last.
How long will the kitchen be closed?
Many restaurant kitchens are done overnight or across a two-day closure. We phase hotel and institutional kitchens by station. Foot traffic can return within hours of the topcoat, and full service follows the next day for most systems.
Is a resinous kitchen floor slip resistant when wet?
Yes. A quartz or aggregate broadcast in the topcoat creates a textured surface that holds traction even with water and grease on it at the end of a rush. We set the texture with your team so it balances safety and easy cleaning.
Will the new floor pass a health inspection?
Health inspectors routinely accept joint-free, non-absorbent, coved resinous floors in commercial kitchens. We detail the floor to remove the seams and low spots inspectors check, and we provide manufacturer data sheets for your records.
A Concrete Family That Understands Kitchen Slabs
I am Matt Hage, owner of The Concrete Guy. My family has worked Minnesota concrete since 1920. A kitchen floor only lasts if the slab under it is sound and dry enough, so we test and prepare every kitchen slab before any system goes down. We install kitchen floors across the metro. That includes Minneapolis, Edina, Eden Prairie, Burnsville, and Woodbury. We also travel for projects nationwide.
Compare kitchen systems on our urethane cement flooring page. You can also see our wider commercial flooring work or request a kitchen quote today.









